Learning About Appliance Services

Dishwashers are designed to perform their job day in and day out for years and years at a time. This can make it easy to overlook the amount of stress to which a dishwasher is subjected; after all, they are exposed to two destructive forces--heat and water--on a highly regular basis. If you would like to learn more about some of the warning signs that your dishwasher is starting to get worn down, read on. This article will discuss three clear signals that it may be time to call a professional repair person from a place like A OK Appliance Service.

Your Dishes Are Cold To The Touch

Dishwashers rely heavily on heat to accomplish their cleaning, disinfecting, and drying tasks. In a well working machine, this heat will leave the dishes nice and toasty warm at the end of a cycle. Yet if you have noticed that your dishes are coming out of the washer cold to the touch, chances are you're dealing with a faulty heating element.

Unfortunately, to verify this hypothesis, it is necessary to open up your dishwasher and expose its heating element. This is a task best left to a trained professional. Once the heating element has been exposed, they will use the electrical tool known as a multimeter to determine whether the heating element is displaying proper continuity. If not, it will be necessary to install a working replacement.

Standing Water At The End Of The Cycle

A fully functioning dishwasher should finish its cycle with virtually no water inside of the machine. You can be sure that something is not working the way it should if you have been noticing a gross, food-choked layer of standing water at the bottom of your dishwasher. This problem is one of the most common dishwasher ailments, thanks to the fact that debris and grease will naturally accumulate in your dishwasher's drain line as time goes on.

As you can imagine, such unwanted build ups will eventually get to the point where they either restrict or completely obstruct the flow of water out of your dishwasher. The good news is that this problem is fairly simple to repair. A repair person will simply have to gain access to the drain line and manually clear out the source of the clog.

Dishwasher Fills With Too Much Water

Sometimes an excess amount of water in your dishwasher is caused by other things than a clogged drain line. It may also be indicative of a stuck float valve. This means that the valve will be unable to shut off the flow of water into your machine. This problem commonly manifests as overflows and leaks. Contact a repair person as soon as possible to get your float valve working right once more.